Meegeleverde accessoires
- 1x Teradek Bolt XT 500 RX HDMI/SDI Receiver
- 1x Teradek Bolt XT 500 TX HDMI/SDI Transmitter
- 2x Teradek battery plate
- 1x 2 pin LEMO > D-Tap cable
- 1x 3/8" - 1/4" reducing screw
- 1x Sony NP-F battery charger
- 4x Sony NP-F750/NP-F770 battery
- 2x Antenna
- 1x Cold shoe Mount with screw
- 2x HDMI cable 1 meter
- 2x SDI cable 1 meter
Top specs
- Supports up to 1080p60 Resolution
- Backward Compatible with Select Systems
- 3G-SDI and HDMI Inputs/Outputs
- Cross Conversion
Met de Teradek Bolt 500 XT 3G-SDI / HDMI kan je onmiddellijk beginnen met het verzenden van een 1080p60 signaal vanaf een SDI- of HDMI-bron. De zero-latency zender en ontvanger beschikt over een 152 meter 'line-of-site transmissieafstand. Je kan een visueel verlies vrij 3G-videosignalen verzenden en ontvangen van een Bolt 500-zender zonder latentie. De zender beschikt over cross-conversion, hier mee kan je je SDI camera op een HDMI monitor aansluiten.
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter Specs
| Construction | Milled Aluminum Chassis and Regulation-Compliant PCB |
| Video Inputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle |
| Video Outputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit |
| Latency | <0.001 Seconds (TX to RX without Format Conversion) |
| Supported Resolutions | 1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50 |
| Video Processing | Compression
Visually Lossless
Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color) |
| Audio Compression | 48 kHz, 24-bit PCM |
| Audio Input | Embedded |
| Interfaces | Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB |
| Wireless | Non-DFS Frequencies- UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
- EU & JP: 5.19 to 5.23 GHz
DFS Frequencies
- US: 5.27 to 5.55 GHz and 5.67 GHz
- EU & JP: 5.27 to 5.67 GHz
|
| RF Power | 17 dBm EIRP |
| Encryption | AES-128 |
| Range | Up to 500' / 152.4 m Line of Sight |
| Unicast Multicast | Unicast / Multicast |
| Noise Rejection | Can Coexist with Wi-Fi and 5 GHz Cordless Phones |
| Power Input | 2-Pin Connector
7 to 17 VDC |
| Power Consumption | Nominal 7.3 W (Measured at 1080p60) |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Mountable | 1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes |
| Dimensions | 0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm |
| Weight | 8 oz / 226 g |
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver Specs
| Construction | Milled aluminum Chassis and Regulation-Compliant PCB |
| Video Outputs | SDI: 2 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle
USB: 1 x USB Type 3.0 Micro-B Receptacle |
| Color Sampling | SDI: YCbCr 4:2:2, 10-Bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit |
| Latency | <0.001 Seconds (TX to RX without Format Conversion) |
| Supported Resolutions | 1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50 (via HDMI Only)
480p: 59.94 (via HDMI Only)
576i: 50
480i: 59.94 |
| Video Processing | Compression
Visually Lossless
Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color) |
| Audio Compression | 48 kHz, 24-Bit PCM |
| Audio Input | Embedded |
| Interfaces | Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB |
| Wireless | Non-DFS Frequencies- UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
- EU & JP: 5.19 to 5.23 GHz
DFS Frequencies
- US: 5.27 to 5.55 GHz and 5.67 GHz
- EU & JP: 5.27 to 5.67 GHz
|
| RF Power | 15 dBm EIRP |
| Encryption | AES-128 |
| Range | Up to 500' / 152.4 m Line of Sight |
| Unicast Multicast | Unicast / Multicast |
| Noise Rejection | Can Coexist with Wi-Fi and 5 GHz Cordless Phones |
| Power Input | 2-Pin Connector
7 to 28 VDC |
| Power Consumption | Nominal 9 W (Measured at 1080p60) |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Mountable | 1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes |
| Dimensions | 6 x 3.4 x 1" / 15.24 x 8.64 x 2.54 cm |
| Weight | 10.5 oz / 297.7 g |
