Supplied accessories
- 1x Rode VideoMic PRO - bag
- 1x Rode Deadcat VMPR
- 1x 9V battery
Top specs
- Mobile Journalist, Vlogger, Run & Gun
- For Cameras and Portable Recorders
- 70-Hr Run Time via 9V Battery
- Gain and Bass Roll-Off
- Compact and Lightweight
- Windscreen Reduces Wind Noise
- Integrated Shoe/Pole Shockmount
The VideoMic Pro by Rode is the perfect shotgun microphone for professional use. Thanks to its compact dimensions and light weight, you can use it on every photo or video camera. Attention: we do not remove the 9 volt battery from the previous renter. It may die during your shoot. So be sure to always bring an extra battery.
Rode VideoMic Pro Specs
Microphone
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | Electret Condenser |
| Diaphragm | 0.5" / 12.70 mm |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State (JFET) |
| Pad | None |
| High-Pass Filter | 80 Hz |
| Tone Adjustment | None |
| Gain Adjustment | -10 dB to +20 dB |
| Indicators | 1 x Single LED (Power) |
| On-Board Controls | Gain, High-Pass Filter, On/Off |
| Windscreen | Foam (Included) |
Performance
| Frequency Range | 40 Hz to 20 kHz |
| Maximum SPL | 134 dB SPL |
| Off-Axis Rejection | 2 dB at 60°
18 dB at 120°
10 dB at 180° |
| Impedance | 200 Ohms |
| Sensitivity | -32 dBV/Pa at 1 kHz |
| Output Level | 6.9 dBu (Max) |
| Dynamic Range | 120 dB |
| Signal-to-Noise Ratio | 80 dB |
| Equivalent Noise Level | 14 dB A-Weighted |
Connectivity
| Output Connectors (Analog) | 1 x 1/8" / 3.5 mm TRS |
| Number of Conductors | 2 |
| Wireless Connectivity | None |
Power
| Operating Voltage | 9 V (Battery Power) |
| Operating Current Consumption | 7.8 mA |
| Battery Type | 1 x 9 V |
| Approximate Battery Life | 70 Hours |
Physical
| Color | Black |
| Mounting | 3/8"-16 Female, Camera/Shoe-Mount, Shockmount (via Integrated Hardware) |
| Dimensions | ø: 3.94 x L: 6.69" / ø: 100 x L: 169.93 mm |
| Weight | 3 oz / 85 g |
