The Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone is an interference tube directional microphone. Thanks to its interference tube technology, this microphone is highly directional, making it especially suited for outdoor recordings. The microphone has very low inherent self-noise levels and a high sensitivity level. In combination with its audio transmission range of 40 - 20.000 Hz, this microphone is capable of high-quality audio recordings. Its length is 249.94mm and it weighs 175 g.

Attention! This set does not include a boompole.

Supplied accessories

1x Deadcat

Top specs

40 Hz to 20 kHz Frequency Response
Hypercardioid at Low & Mid Frequencies
Low 13 dBA Self-Noise
High Sensitivity of -32 dB
Lobar Pattern at High Frequencies

Transducer	Pressure Gradient/Interference Receiver Condenser
Polar Pattern	Low, Mid: Hypercardioid Above 2 kHz: Lobar
Frequency Response	40 to 20,000 Hz
Dynamic Range (Typical)	117 dB
Signal-to-Noise Ratio	81 dB
Maximum Input Sound Level	130 dB, (@ 1 KHz) Sensitivity 25 mV/Pa +/- 1dB
Power Requirements	Phantom Power 48 v, (± 12 v)
Output Impedance	Nominal Impedance: 25 Ohms Minimum Terminating Impedance: 800 Ohms
Output Connectors	XLR-3M Type
Pad	None
Low Frequency Roll-Off	None
Applications	Film, Radio and Television, Especially for Outside Broadcast Applications.
Dimensions (L x Diam)	9.84 x 0.74" (250 x 19 mm)
Weight	5.82 oz (175 g)

Downloads

Sennheiser mkh-416 manual en

Sennheiser MKH-416 P48

Supplied accessories

1x Deadcat

Top specs

40 Hz to 20 kHz Frequency Response
Hypercardioid at Low & Mid Frequencies
Low 13 dBA Self-Noise
High Sensitivity of -32 dB
Lobar Pattern at High Frequencies

Transducer	Pressure Gradient/Interference Receiver Condenser
Polar Pattern	Low, Mid: Hypercardioid Above 2 kHz: Lobar
Frequency Response	40 to 20,000 Hz
Dynamic Range (Typical)	117 dB
Signal-to-Noise Ratio	81 dB
Maximum Input Sound Level	130 dB, (@ 1 KHz) Sensitivity 25 mV/Pa +/- 1dB
Power Requirements	Phantom Power 48 v, (± 12 v)
Output Impedance	Nominal Impedance: 25 Ohms Minimum Terminating Impedance: 800 Ohms
Output Connectors	XLR-3M Type
Pad	None
Low Frequency Roll-Off	None
Applications	Film, Radio and Television, Especially for Outside Broadcast Applications.
Dimensions (L x Diam)	9.84 x 0.74" (250 x 19 mm)
Weight	5.82 oz (175 g)

Downloads

Sennheiser mkh-416 manual en

Sennheiser MKH-416 P48

Information

Locations

Blog

Sennheiser MKH-416 P48

Stay informed of all discount promotions

Information

Locations

Blog