Supplied accessories
- 2x Deadcat
- 2x Windscreen
- 2x Rode GO II Clip-On Transmitter
- 1x Rode GO II Clip-On Receiver / Recorder
- 1x 4-poorts USB charger
- 1x Eurostekker
- 3x USB A - USB C cable
- 1x TRS > TRS mini-jack cable
- 2x Rode Lavalier GO + Mic clip
Top specs
- 2x Rode Lavalier GO
- 2 x Mini Clip-On Transmitters/Recorders
- Records 7 Hours of Uncompressed Audio
- 7-Hr Rechargeable Batteries + USB Power
The Wireless Go II microphone from Røde is a compact and lightweight wireless microphone that is very easy to use. The set consists of two transmitters and one receiver and has a dual channel system to record from two different sources simultaneously. The transmitters have built-in omnidirectional microphones for good sound quality while recording. The receiver also has a TRS and a usb-c jack.
The dimensions of an individual receiver or transmitter are 44 x 45.3 x 18.3 mm and weigh 30g.
Warning: The Wireless Go II may produce noise when used with the Sony A7S III and the Sony FX3. You can reduce this by setting the Sony camera's Audio Rec Level to 6, and setting the Red receiver to 0.
Rode Lav go Specs
Microphone
| Form Factor | Lavalier |
| Sound Field | Mono |
| Polar Pattern | Omnidirectional |
|
|
|
|
Rode Wireless GO II Specs
System
| Wireless Transmission | Digital 2.4 GHz |
| Included Transmitters | 2 x Bodypack with Microphone |
| Diversity | Non-Diversity |
| Max Operating Range | 656.2' / 200 m |
| Max Microphones per Band | 4 |
| Built-In Recorder | Yes |
| Timecode Support | No |
| Control App Support | Yes |
| Latency | 3.5 to 4 ms |
| Encryption | 128-Bit |
Receiver
| Form Factor | Beltpack |
| Mounting Options | Belt Clip (with Included Hardware) |
| Antenna | 1 x Internal |
| Number of Audio Channels | 2 |
| Audio I/O | 1 x 1/8" / 3.5 mm TRS Female Unbalanced Mic Output |
| Gain Range | -24 to 0 dB (12 dB Steps) |
| USB/Lightning Connectivity | 1 x USB Type-C (Audio, Bus Power, Charging) |
| Power Requirements | Battery or Bus Power (USB) |
| Battery Type | 1 x Built-In Rechargeable (Included) |
| Battery Charging Time | 2 Hours |
| Approx. Battery Life | 7 Hours |
| Display & Indicators | 1 x Graphic LCD (AF Level, Battery Status, Metering, RF Level, Transmitter Battery Status) |
| Dimensions | 1.7 x 1.8 x 0.7" / 4.4 x 4.5 x 1.8 cm |
| Weight | 1.1 oz / 32 g |
Transmitter
| Form Factor | Bodypack with Microphone |
| RF Output Power | Not Specified by Manufacturer |
| Audio I/O | 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input |
| Muting | Off/On Switch |
| Audio Input Level | -20 dBV (Max) |
| Auto-Level Control | No |
| Recorder Sample Rates | WAV:
48 kHz (Record) |
| Recorder Bit Depths | 24-Bit |
| Audio File Formats | WAV |
| Gain Range | +20 dB |
|
|
| Sync Method | Proprietary |
| Antenna | 1 x Internal |
| Power Requirements | Battery or Bus Power (USB) |
| Battery Type | 1 x Built-In Rechargeable (Included) |
| Battery Charging Time | 2 Hours |
| Approx. Battery Life | 7 Hours |
| USB/Lightning Connectivity | 1 x USB Type-C (Bus Power, Charging) |
| Display & Indicators | 1 x LED (Sync)
1 x LED (Battery Status) |
| Dimensions | 1.7 x 1.8 x 0.7" / 4.4 x 4.5 x 1.8 cm |
| Weight | 1.1 oz / 30 g |
Microphone
| Form Factor | Integrated |
| Sound Field | Mono |
| Operating Principle | Pressure Operated |
| Capsule | Electret Condenser |
| Polar Pattern | Omnidirectional |
| Frequency Range | 50 Hz to 20 kHz |
| Equivalent Noise Level | 22 dB A-Weighted |
| Maximum SPL | 100 dB SPL |
